Product Description
PU
Based Degranulation-free Track Material (Running Track and
Field)
Product
description:
Nalstane PU based
Degranualtion-free Track material is fully MDI based polyurethane
copolymers, all parts passed SGS test of non-heavy metal and
Non-VOC contamination. It can be on-site casting to form
running track and field with self-texture on surface which no need
any EPDM or other rubber particles, imparts high abrasion resistance and no any
degranulations. Nalstane PU based
Degranualtion-free Track are multi layers and imparts strong
but flexible structure, endurable color refreshing, and long time
utilization. The installation thickness is usually 9 or *3 MM(up to
IAAF standard).
Feartures:
1.
High abrasion resistance
New formulation with advanced
materials engaged, the self-textured surface is tough and very
strong adhesion to substrates, imparts high abrasion resistance
than traditional truck materials which relys on only EPDM or other
rubber particles to form frictions.
2, Perfect Athletic
Performance
According to the sports
biomechanical, Nalstane PU based degranualtion-free Track forms 3
layers construction, a innovation layer of closed-porous foaming
elastic material is inside, which gives high resilience when
deformed. The rebound rate exceeds the standard of IAAF which helps
reduce the damage force to body and gives perfect supports to
athletes foots. It is a new sports flooring structure in the
world.
3, Super
Weatherability:
The innovation materials of
Anti-Sunlight and Attack-fungus formulated inside Nalstane PU based
Degranualtion-free Track, which imparts excellent performance in
aging-resistance, mildew proofing and bacterial resistance.
Comparing to traditional ultraviolet absorbents and mould
inhibitors, the new formulation is more environmental friendly. No
Benzene hydrocarbon solvent contained.
4, Strong Adhesion:
The advanced materials can
wetting/penetrate substrate fast and curing with react functions to
form a net-connected structures together with substrate, imparts
much more strong adhesion than traditional PU track materials,
easily solved the traditional problems of delaminations and
blisters.
Installation
instruction:
1, Substrate
treatment:
A
tight, uniform and even surface is required to avoid the need for
additional applications of Filler Coat. New asphalt surfaces shall
be allowed to cure for a minimum of *0 days before the
installation. The surface finish shall be thoroughly cleaned to
remove all loose dirt, dust, oil, grease, leaves and other debris.
The surface shall be flooded with water to check for low areas.
Minor depressions up to 3mm may be leveled using undiluted Filler
Coat applied by steel trowel/squeegee or a combination of both.
Deeper depressions and minor surface cracks shall be filled with
Nalstane M***0 blending with concrete.
2,
casting elastic base:
mixing
the two parts elastic materials with EPDM or black rubber granules
according to TDS listed ration, add in the catalyst and diluents
according to the on-site temperature. Stirring for required time
and then casting all the mixing onto substrate with expected
thickness, make the surface even.
3,
install closed-porous elastic layer:
Mixing
the two parts closed porous elastic materials according to TDS
listed ration, knife coating it onto cured elastic
base.
4,
spray coating the self-texture layer:
Mixing
the two parts self-texture materials according to TDS listed
ration, an air-less press spray gun is used for installation. The
coating shall form a texture on surface automatically, after
curing, the surface performs high slip proofing, which meet the
standard of IAAF.
5,
Line mark:
Measure the courts according to IAAF standard,
paint the line twice, after curing, cleaning and
housekeeping.
| Country: |
China |
| Model No: |
T-001，T-002
|
| FOB Price: |
1 / Piece (Negotiable)
Get Latest Price
|
| Place of Origin: |
- |
| Price for Minimum Order: |
1 per Piece |
| Minimum Order Quantity: |
100000 Square Meter |
| Packaging Detail: |
Acrylic acid lacquer: 20kg/drum 78kg/drum |
| Delivery Time: |
7-10days after receipt of payment |
| Supplying Ability: |
- |
| Payment Type: |
T/T, L/C, Western Union, Other |
| Product Group : |
- |
